Description

Feature : - Completely sealed: Prevents moisture from being trapped inside the housing. - One-way vent: Drives out moisture and avoids lens misting. - LED DRL: Makes your vehicle more visible to other road users to increase your driving safety. - Multi-surface reflectors: Increase light output & distance. - PC lens: Impact resistance for an enhanced driving experience in any environment. Fits for : - For 1999-2006 GMC Sierra 1500/2500 - For 2001-2006 GMC Sierra 1500 HD/2500 HD/3500 - For 2007 GMC Sierra 1500 Classic /1500HD Classic /2500HD Classic /3500 Classic - For 2000-2006 GMC Yukon - For 2000-2006 GMC Yukon XL 1500/2500 (* Don't fit for C3 or Denali ) - Vehicle Compatibility Reference Number: GM2502188, 15289275, 15850351, 16526135, GM2503188,15289276,15850352,16526136 Specification : - Condition: 100% Brand New and High Quality - Color: Black Housing + Clear Lens+LED DRL Headlight - High Beam Bulbs Size: 9005 Bulbs (Not included) - Low Beam Bulbs Size: 9006 Bulbs (Not included) - Signal Light Bulbs Size: 3157A Bulbs (Not included) Packing List : - 1 Pair of Headlights (Driver & Passenger Side) Please Note : Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground. 1. 【Find the adjustment screws】 Firstly, locate the adjustment screws on your vehicle. 2. 【Adjust the headlights individually】 The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens. 3. 【Adjust the vertical field】 The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall. 4. 【Adjust the horizontal field】 The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line. 5. 【Test your results】 Condensation DOES NOT Mean a Product Problem It's normal that the condensation appears inside the headlights because of temperature differences, air pressure, etc, thus it is not the quality problem of headlights. How to Remove Temporary Condensation 1. Check the vents to prevent blocking and switch on the low beam light for about 20 mins 2. Take the headlight bulb out and drive out moisture 3. Put a silica gel packet in the housing to soak up moisture WE ACCEPT THESE PAYMENT METHODS ( 10% sales tax will be applied for orders shipped to Washington state by state law ) 30 Days easy returns satisfaction guarantee. Items to be returned must be in original factory condition. Please enclose a note about item number and order id, your eBay ID and the reason of return. On Apr 18, 2024 at 18:50:43 PDT, seller added the following information: On Jul 18, 2024 at 00:26:05 PDT, seller added the following information: